PS4 Elite Controller, 6 Axis Sensor Modded Custom programmable Dual Vibration Elite PS4/PS3 Wireless Game Controller Joystick with Back Paddles and L3 R3 Buttons for FPS Games,Destiny, Fortnite,WWII
The Custom elite wireless PS4 controller is specially designed for Sony PlayStation 4 PS4/PS4 slim/PS4 pro console, and it also can be switch to working with PS3 playstaion3 console via cable connect
Multipurpose Buttons and Interfaces:
The two joysticks click down for L3/R3 buttons;with 3D RSF joysticks; with 3.5mm TRRS stereophonic headphone jack, support mic and headset
Custom Program Function:
The 4 back paddles (M1-M4) can be mapped with the others function buttons in the program situation. and you can change the configuration of the paddles on your own at any time
2 Modes In program:
Slide the mode button on the back and set the paddles mapping in mode1/mode2 then paddles` function will automatically saved in mode1/mode2 for your reuse
Only support wired connecting with PS3 console, and please note that 6-axis is not available in PS3; the controller might needs to be update if the PS4 console update its system,please contact us to get the latest updated firmware at that time
Compatible: PS4/PS4 pro/PS4 slim/PS3
Connection: Wireless connect with ps4,wired connect with ps3
Function: Build in Dual Motor, 3D RSF shot joystick, custom program
Sensor: 6-axis sensor function
Touch Pad: With 2 point sensitive capacitance touchpad
RC distance: 10 meters
LED: RGB lightning bar
Speaker:With speaker separate output solution
MIC/Headphone Jack:3.5mm TRRS stereophonic hole,support mic and headset
Battery: 600MAH polymer lithium battery
About the Program
Slide the back button to NORMAL, program function invalid，slide to PROGRAM side, then the 4 paddles (M1,M2,M3,M4) can be programmed.
Mode 1-2 Function:
The 4 back paddle buttons(M1-M4) can be mapped with two set different function buttons, slide the mode button “1 to 2” and “2 to 1” to change the paddle keys function.set the paddles mapping in mode1/mode2 then paddles` function will automatically saved in mode1/mode2 for your reuse
How to Program:
E.X.: Press and hold “SET” button for 3 seconds, RGB lighting bar start flashing, press“X” and press “M1”, lighting bar stop flashing, then “M1” program complete(M1=X).
Players have 4 paddle keys can be programming(M1-M4). Except “Share”, “Option”, and “PS”, ”Triggers”, " D-Pad",all buttons (X,○,□,△,L1,L2,R1,R2,) can be mapped to paddle keys.
Reset: When the paddle keys have already been programmed, just need to map the paddle keys again with other buttons.(ex. If M1=X. Press and hold “SET” 3S, and press “□”, then press “M1”, you will get M1=□).
PS: Factory Default: MODE2, M1,M2,M3,M4 = X,○,□,△.